Our Products

Find your specialty chemical additives by using the product filters or searching below. You can include multiple selections in each drop-down list.

  • Market

  • Supplier

  • Product Type

  • Applications

  • Reset

Altapyne™ M-28B is a medium colored distilled tall oil (DTO), containing fatty acids and approximately 28% rosin.  Altapyne M-28B is used as an emulsifier for metalworking fluids and an asphalt emulsion additive.

Altapyne™ M-38 is a medium colored distilled tall oil (DTO) containing fatty acids and approximately 40% rosin.  Altapyne M-38 offers economy and improved quality in fatty acid applications where high rosin content enhances product performance in metalworking fluids.

Altapyne™ L1 is a bio-based, light-colored tall oil fatty acid (TOFA) containing a low level of rosin acids.  Altapyne L1 is an excellent raw material for the production of high-quality specialty industrial chemicals such as dimer acids, epoxidized tallate esters and fatty acid esters.

Altapyne™ L5 is a 100% bio-based, tall oil fatty acid (TOFA) which remains liquid at low temperatures. Typical applications include industrial cleaners, metalworking fluids and corrosion inhibitors.

Akypo TEC AM VG is a special blend of ether carboxylic acids which improves the lifetime of water-miscible metalworking fluids.  In formulations, Akypo TEC AM VG exhibits strong solubilizing and dispersing properties; hard water stability; support of corrosion prevention; mildness to the skin and overall physical and chemical stability.

AKYPO LF 4 is an excellent low foaming, anionic surfactant with no sulfur, phosphorus or nitrogen in the molecule.  AKYPO LF 4’s main use is as a solubiliser for metalworking fluids.  In formulations, AKYPO LF 4 supports corrosion prevention; is hard water stable and mild to the skin.

AKYPO LF 1 is an anionic, low foaming surfactant with hydrotropic properties.  AKYPO LF 1 is a solubiliser for metalworking fluids and reduces foam stability when combined with foaming surfactants.  In formulations, the AKYPO LF 1 exhibits the support of corrosion prevention; hard water stability and mildness to skin.

AKYPO LF 2 is an anionic, low foaming surfactant with hydrotropic properties.  AKYPO LF 2 is a solubiliser for metalworking fluids and reduces foam stability when combined with foaming surfactants.  In formulations, AKYPO LF 2 exhibits the support of corrosion prevention, hard water stability and mildness to skin.

Tego® STO V is a liquid, non-ionic sorbitan trioleate emulsifier used in metalworking fluids, concrete release agents and agrochemicals. Tego STO V is based on raw materials derived from natural products imparting this product with good toxicological and ecological properties and good dermatological properties.

Dailube® S-120 is an active EP additive consisting of sulfurized lard and olefin. Dailube S-120 has been designed to have low viscosity. The main application for Dailube S-120 is metalworking fluids.